Compare commits

..

5 Commits

Author SHA1 Message Date
636addedd9 Thesis.org saved 2025-07-27 14:27:23 +04:00
4e7fb13247 XRD phases stuff 2025-07-27 14:27:23 +04:00
d628528cba Made some notes about EDS 2025-07-27 14:27:23 +04:00
bb53671612 Adds EDS stuff 2025-07-27 14:27:23 +04:00
6bf6b93697 Cleans up XRD in preparation for stuff 2025-07-27 14:27:23 +04:00
15 changed files with 16260 additions and 0 deletions

View File

@ -357,6 +357,18 @@ I don't what it is actually.
#+LaTeX: \pagestyle{chapter}
* Meetings with Dr Rehan
** Impromptu Teams call w/ Dr Rehan
SCHEDULED: <2025-07-17 خ>
- Chase Shameer with SE and BSE
+ Thursday next week or the week after
- PHD at uni?
- SEM with Cast HIPed and some a new stellite alloy!
* Chapters
** Introduction
@ -984,6 +996,17 @@ The cast Stellite 1 alloys were produced via sand castings. Spherical gas-atomiz
# So this is SEM work
The microstructure of the alloys were observed via scanning electron microscopy (SEM) using a back-scattered electron imaging detector (BSE), with elemental compositions of the observed phases determined via energy dispersive X-ray spectroscopy (EDS). Image analysis of BSE images was conducted to ascertain area fractions of individual phases.
*** Description of XRD phase identification
# https://doi.org/10.1039/C9EE00381A
# In our samples, two phases of cobalt- face centered-cubic (fcc) and hexagonal close-packed (hcp) coexist with fcc as the predominant phase. The major diffraction peaks at 2θ values of 44.35° and 75.95° corresponding to (111) and (220) crystal planes, respectively, can be indexed as fcc-phase metallic cobalt (JCPDS File Card No. 150806, a = 3.5447 A˚). 10 Moreover, hcp-phase cobalt could also be detected as peaks corresponding to 41.6, 44.5, 47.6 and 75.8 related to (100), (002), (101) and (110) planes, respectively, (JCPDS File Card No. 01-071-4239, a = 2.506 A˚, c = 4.069 A˚).11
*** Cool sentence I like
# https://www.sciencedirect.com/science/article/pii/S0257897217302992?casa_token=whsUehaqRrkAAAAA:_WZkVyvfG2RmA-GBQ8MCOJFPw7yDVSDlxeBvbbp3epx9USJ4kuUdtLZfEXvlPhZiYR-fQO162Q
# Additional improvements in the corrosion resistance and mechanical properties (i.e. hardness and wear resistance) of commercial Stellite hardfacing alloys is achieved either by altering the chemical composition with elements such as C, W or Mo [6], [8], [9] or by varying the deposition techniques and/or parameters [10], [11], [12].
*** Phase analysis via XRD :ignore_heading:
Microstructure phase analysis was performed with a Bruker Discover D8 <> X-ray diffractometer (XRD) with Cu $K_{\alpha}$ radiation ($\lambda = 1.5406 \AA$) in Bragg-Brentano $\theta:2\theta$ configuration across the diffraction angle range 20deg <> to 120deg <> with a step size of 0.00deg <>.

File diff suppressed because one or more lines are too long

783
eds/EDS.ipynb Normal file

File diff suppressed because one or more lines are too long

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

File diff suppressed because it is too large Load Diff

Binary file not shown.

BIN
xrd_phase/Lesson-8.pdf Normal file

Binary file not shown.

BIN
xrd_phase/hold.pdf Normal file

Binary file not shown.

Binary file not shown.

Binary file not shown.